parlor tricks parlor tricks

baby steps

notes from a visit to The Caning Shop – several of which may no longer apply… !

notes from a visit to The Caning Shop – several of which may no longer apply… !

weaving Danish cord on a project for a furniture designer and carpenter friend.

learned a good deal so far about weaving Danish cord, communication, time management, and developing a process.

bookmarking a few reference videos to come back to as i get going on the weaving:

steadily working through this. weaving is in my wheelhouse, woodwork isn’t.

taking baby steps – starting with weaving diagrams and nailing templates.

1 inch warp spacing with typical 1/2 inch weft spacing. most conventional approach resulting in ~ 4 wraps between each warp pair.

1 inch warp spacing with typical 1/2 inch weft spacing. most conventional approach resulting in ~ 4 wraps between each warp pair.

1-1/4 inch warp spacingi like the proportions of this – a bit more frame wrapping between warps (~ 6) and less weaving, seems alright.

1-1/4 inch warp spacing

i like the proportions of this – a bit more frame wrapping between warps (~ 6) and less weaving, seems alright.

1-1/4 inch warp spacing along the frame stiles – kinda neat. may not be the pattern for this, tho.

1-1/4 inch warp spacing along the frame stiles – kinda neat. may not be the pattern for this, tho.

need to locate and drill pilot holes for the “L” shaped Danish nails to get tacked into.

that’s a measure twice drill once type deal. so imma measure a few times more…

made nail templates indicating 1/2” weft (top/cyan) and 1-1/4” warp (bottom/magenta) spacing. first and last warps are a double pair – hence the 1/2” spaced pair at either end.staggering the nails to help prevent the wood from splitting – a tip first picked up from The Caning Shop.

made nail templates indicating 1/2” weft (top/cyan) and 1-1/4” warp (bottom/magenta) spacing. first and last warps are a double pair – hence the 1/2” spaced pair at either end.

staggering the nails to help prevent the wood from splitting – a tip first picked up from The Caning Shop.

nail template taped to the inside face of the rails (warp) and stiles (weft).seeing the template on the frame i’m thinking the orientation of the weft nails should flip. or – could eliminate the farthest weft and warp nails at the inside corners and tack down to start and finish.

nail template taped to the inside face of the rails (warp) and stiles (weft).

seeing the template on the frame i’m thinking the orientation of the weft nails should flip. or – could eliminate the farthest weft and warp nails at the inside corners and tack down to start and finish.

goal for this week is to drill pilots, tack “L” nails, and weave at least one frame.

remember: take time to brainstorm, ask for help*, mock things up, take care of your body, document, and enjoy… !

(*thank you, Sam, for your help and support along the way)

sidenote: reminded of Broken Social Scene’s OG version of “Lover’s Spit” via “… (Redux)” off ‘Bee Hives’ played by Rare Earth on KALX last week.

sparked a trip through ‘Spirit If…’ yesterday, from rooter to tooter – *chef’s kiss*

ok, bye bye… !

Read More